Fingertip dexterity
Fine-gauge liners and form-fitting fingertips let technicians feel a thread engage — the main reason gloves get removed on service calls.
Industry · service & install
HVAC & Plumbing Gloves
Fingertip feel for fittings and wiring, with just enough cut protection for sheet-metal duct edges.
15G nylon or 18G HPPEPU or nitrileA2–A3
- Liner
- 15G nylon or 18G HPPE
- Palm
- PU or nitrile
- Cut level
- A2–A3
- Fingertips
- Touchscreen-compatible option
Overview
Small tasks, tight spaces
HVAC and plumbing gloves have to handle a sequence of small, precise tasks: threading a fitting, stripping a wire, seating a connector, tightening a valve in a tight space. Bulky gloves slow all of it down, so technicians work bare-handed and get cut on duct edges instead.
Thin fingertips, reinforced palm
The right glove is thin at the fingertips and reinforced where sheet metal bites. A 15G or 18G liner with a PU or nitrile palm and A2–A3 cut protection covers most service work; a nitrile palm handles wet fittings without losing grip.
One glove across HVAC, plumbing and electrical
HVAC, plumbing and electrical work share one problem: the glove has to be thin enough to start a screw and tough enough to survive sheet metal, pipe threads and insulation. A 15G or 18G nitrile palm glove with a short knit wrist is the usual answer, because it leaves the wrist free for a watch, a phone and a tool belt while covering the palm where the cuts happen. On copper and aluminium sheet, a cut level at the fingertips is worth the small loss in feel. For live electrical work, remember that a general glove is not insulating protection.
Reviewed · Specs confirmed on the approved sample
Duct-edge cut protection
A2–A3 HPPE at the fingertips and palm handles sheet-metal duct edges without adding bulk across the whole hand.
Wet grip
A nitrile palm holds wet pipe and fittings far better than leather, which hardens and slips when soaked.
Reference
Options and ratings
Ratings depend on liner, gauge and coating. Final values are confirmed on the approved sample.
Service task to glove
Match the fingertip to the task: 18G for screws and duct edges, 15G nitrile for wet fittings, and no metal studs near a live panel.
| Task | Glove | Cut | Note |
|---|---|---|---|
| Duct work | 18G HPPE, PU palm | A2–A3 | Thin fingertips for screws |
| Pipe fitting | 15G nylon, nitrile palm | A1–A2 | Wet grip |
| Electrical panel | 15G nylon, PU palm | A1 | No metal studs |
| Refrigerant lines | Nitrile palm, fleece back | A1 | Cold lines plus grip |
| Roof unit service | A3, touchscreen fingertips | A3 | Outdoor, phone use |
Specification sheet
P2 · hvac gloves- Liner
- 15G nylon or 18G HPPE
- Palm
- PU or nitrile
- Cut level
- A2–A3
- Fingertips
- Touchscreen-compatible option
- Sizes
- S–XL
- MOQ
- 500 pairs per style and color
- Packaging
- 10 pairs per polybag, 200 pairs per carton
- Lead time
- Samples 7–10 days · bulk 20–30 days
Questions buyers ask
Straight answers
If your question is about a specific style, send the spec and we will answer with the sample plan instead of a generic reply.
Can these gloves be used for electrical work?
No. They are work gloves, not insulating gloves. Electrical protection requires a dedicated insulating glove rated for the voltage, with the correct class and testing regime.
What cut level do HVAC technicians need?
A2–A3 covers sheet-metal duct edges and most service handling. Thicker gloves reduce feel, so avoid jumping to A4 unless the task demands it.
Do they work with phones and tablets?
Yes with conductive fingertips. Service apps and diagnostics are a common reason technicians remove gloves, so this option usually pays for itself.
Are they warm enough for rooftop work?
Standard builds are not insulated. For cold rooftop service, specify a fleece-backed version with a nitrile palm. For wet roofs, keep the nitrile palm and skip the thicker liner, which only holds water against the skin.
Next step
Send your spec. Get samples and a landed price.
Share the glove type, liner and coating, quantities and destination. We reply with the sample plan, unit price at your quantity and the packaging options for your market.